There is no one-size-fits-all QR code. A label on packaging, a restaurant table tent, and a street poster all need different dimensions because the scan distance and payload density are different.
A common rule of thumb is that the scanning distance should be no more than about ten times the QR code width. If users scan from farther away, increase the printed size.
Start around 20 to 25 mm for short dynamic URLs with clear contrast and quiet zone.
Start around 25 to 35 mm depending on the viewing distance and camera conditions.
Use significantly larger QR codes because people scan from farther away and often at an angle.
Longer payloads and dense codes need more physical size
Low contrast, glossy surfaces, or poor lighting require more margin
Adding logos or decorative styles increases the need for good sizing and testing
Small labels need extra attention to quiet zone and printer quality
For short, high-contrast dynamic URLs, many teams start around 20 mm, but the minimum safe size depends on scan distance, print quality, and payload density.
Because users scan posters from farther away. Larger dimensions preserve readability at distance and under imperfect camera angles.
Often yes. Logos, gradients, and decorative shapes can reduce scan tolerance, so a slightly larger size and real-device testing are recommended.
Use dynamic short links, keep contrast high, avoid over-dense payloads, leave enough quiet zone, and test before mass printing.
Start with shorter payloads, dynamic redirects, and tested templates.
Create QR Code